Jump to Table of Contents Collapse Sidebar

P0288R8
move_only_function

Draft Proposal,

Authors:
Matt Calabrese <[email protected]>
Ryan McDougall <[email protected]>
Audience:
LWG
Project:
ISO/IEC JTC1/SC22/WG21 14882: Programming Language — C++

Abstract

This paper proposes a conservative, move-only equivalent of std::function .

1. Brief History

This paper started as a proposal by David Krauss, N4543[1], from 2015 and there has been an open issue in the LEWG bugzilla requesting such a facility since 2014[2].

Since then, the paper has gone through 4 revisions and has been considered in small groups in LEWG multiple times. Gradual feedback has led to the conservative proposal seen here. The most-recent draft prior to this was a late-paper written and presented by Ryan McDougall in LEWGI in San Diego[3]. It included multiple references to implementations of move-only functions and made a strong case for the importance of a move-only form of std::function .

Feebdack given was encouragement for targetting C++20.

An updated version of that paper was presented on Saturday at the end of the San Diego meeting. Poll results from that presentation are presented after the overview in this document.

The revision was presented in Kona, receiving additional polls and feedback, and was to be forwarded to LWG pending updates reflecting additional poll results. Those changes have been applied to the wording in this paper. Polls from the LEWG Kona review are also provided in this document.

2. Overview

This conservative move_only_function is intended to be the same as std::function , with the exceptions of the following:

  1. It is move-only.

  2. It does not have the const-correctness bug of std::function detailed in n4348.[4]

  3. It provides support for cv/ref/noexcept qualified function types.

  4. It does not have the target_type and target accessors (direction requested by users and implementors).

  5. Invocation has strong preconditions.

3. Specification

The following is relative to N4820.[5]

Let SECTION is a placeholder for the root of the section numbering for [functional].

Insert the following section in Header <functional> synopsis [functional.syn], at the end of SECTION.16, polymorphic function wrappers

            template<class... S> class move_only_function; // not defined

            // Set of partial specializations of move_only_function
            template<class R, class... ArgTypes>
              class move_only_function<R(ArgTypes...) cv ref noexcept(noex)>; // ... see below
          

Insert the following section at the end of Polymorphic function wrapper [func.wrap] at the end.

        SECTION.16.3 move_only_function                                 [func.wrap.mov]

     1  The this header provides partial specializations of move_only_function for
        each combination of the possible replacements of the placeholders cv, ref, and
        noex where:

 (1.1)   — cv is either const or empty.

 (1.2)   — ref is either &, &&, or empty.

 (1.3)   — noex is either true or false.

     2  For each of the possible combinations of the placeholders mentioned above,
        there is a placeholder inv-quals defined as follows:

 (2.1)   — If ref is empty, let inv-quals be cv&

 (2.2)   — Otherwise, let inv-quals be cv ref.

        SECTION.16.3.1 Class template move_only_function            [func.wrap.mov.class]

          namespace std {
            template<class... S> class move_only_function; // not defined

            template<class R, class... ArgTypes>
            class move_only_function<R(ArgTypes...) cv ref noexcept(noex)> {
            public:
              using result_type = R;

              // SECTION.16.3.2, construct/move/destroy
              move_only_function() noexcept;
              move_only_function(nullptr_t) noexcept;
              move_only_function(move_only_function&&) noexcept;
              template<class F> move_only_function(F&&);

              template<class T, class... Args>
                explicit move_only_function(in_place_type_t<T>, Args&&...);
              template<class T, class U, class... Args>
                explicit move_only_function(in_place_type_t<T>, initializer_list<U>, Args&&...);
    
              move_only_function& operator=(move_only_function&&);
              move_only_function& operator=(nullptr_t) noexcept;
              template<class F> move_only_function& operator=(F&&);

              ~move_only_function();

              // SECTION.16.3.3, move_only_function invocation
              explicit operator bool() const noexcept;

              R operator()(ArgTypes...) cv ref noexcept(noex);

              // SECTION.16.3.4, move_only_function utility
              void swap(move_only_function&) noexcept;

              friend void swap(move_only_function&, move_only_function&) noexcept;

              friend bool operator==(const move_only_function&, nullptr_t) noexcept;

            private:
              template<class VT>
                static constexpr bool is-callable-from = see below; // exposition-only
            };
          }

     1  The move_only_function class template provides polymorphic wrappers that generalize
        the notion of a callable object [func.def]. These wrappers can store, move, and
        call arbitrary callable objects, given a call signature, allowing functions to
        be first-class objects.

     2  Implementations are encouraged to avoid the use of dynamically allocated memory
        for a small contained value.

        [ Note: Such small-object optimization can only be applied to types T for
        which is_nothrow_move_constructible_v<T> is true. -- end note ]


        SECTION.16.3.3  Constructors and destructor                              [func.wrap.mov.con]

        template<class VT>
              static constexpr bool is-callable-from = see below; // exposition-only

     1  If noex is true, is-callable-from<VT> is equal to
          is_nothrow_invocable_r_v<R, VT cv ref, Args...> &&
            is_nothrow_invocable_r_v<R, VT inv-quals, Args...>.
        Otherwise, is-callable-from<VT> is equal to
          is_invocable_r_v<R, VT cv ref, Args...> &&
            is_invocable_r_v<R, VT inv-quals, Args...>.

        move_only_function() noexcept;
        move_only_function(nullptr_t) noexcept;

     2        Postconditions: *this has no target object.
 
        move_only_function(move_only_function&& f) noexcept;
 
     3        Postconditions: The target object of *this is the target object f had before
              construction, and f is in a valid state with an unspecified value.

        template<class F> move_only_function(F&& f);

     4        Let VT be decay_t<F>.

     5        Constraints:

 (5.1)            — remove_cvref_t<F> is not the same type as move_only_function, and

 (5.2)            — remove_cvref_t<F> is not a specialization of in_place_type_t, and

 (5.3)            — is_constructible_v<VT, F> is true, and

 (5.4)            — is-callable-from<VT> is true.

     6        Preconditions: VT meets the Cpp17Destructible requirements, and if
              is_move_constructible_v<VT> is true, VT meets the Cpp17MoveConstructible
              requirements.

     7        Postconditions: *this has a target object unless any of the following hold:

 (7.1)            — f is a null function pointer value, or

 (7.2)            — f is a null member pointer value, or

 (7.3)            — remove_cvref_t<F> is a specialization of the move_only_function class template,
                     and f has no target object.

     8        Otherwise, *this targets an object of type VT
              direct-non-list-initialized with std::forward<F>(f).

     9        Throws: Any exception thrown by the initialization of the target object.
              May throw bad_alloc unless VT is a function pointer or a specialization of
              reference_wrapper.

        template<class T, class... Args>
            explicit move_only_function(in_place_type_t<T>, Args&&... args);

    10        Let VT be decay_t<T>.

    11        Constraints:

(11.1)            — is_constructible_v<VT, Args...> is true, and

(11.2)            — is-callable-from<VT> is true.

    12        Mandates: VT is the same type as T.

    13        Preconditions: VT meets the Cpp17Destructible requirements, and if
              is_move_constructible_v<VT> is true, VT meets the Cpp17MoveConstructible
              requirements.

    14        Postconditions: *this targets an object of type VT
              direct-non-list-initialized with std::forward<Args>(args)....

    15        Throws: Any exception thrown by the initialization of the target object.
              May throw bad_alloc unless VT is a function pointer or a specialization of
              reference_wrapper.

        template<class T, class U, class... Args>
            explicit move_only_function(in_place_type_t<T>, initializer_list<U> ilist, Args&&... args);

    16        Let VT be decay_t<T>.

    17        Constraints:

(17.1)            — is_constructible_v<VT, initializer_list<U>&, ArgTypes...> is true, and

(17.2)            — is-callable-from<VT> is true.

    18        Mandates: VT is the same type as T.

    19        Preconditions: VT meets the Cpp17Destructible requirements, and if
              is_move_constructible_v<VT> is true, VT meets the Cpp17MoveConstructible
              requirements.

    20        Postconditions: *this targets an object of type VT
              direct-non-list-initialized with ilist, std::forward<ArgTypes>(args)....

    21        Throws: Any exception thrown by the initialization of the target object.
              May throw bad_alloc unless VT is a function pointer or a specialization of
              reference_wrapper.

        move_only_function& operator=(move_only_function&& f);

    22        Effects: Equivalent to: move_only_function(std::move(f)).swap(*this);

    23        Returns: *this.

        move_only_function& operator=(nullptr_t) noexcept;

    24        Effects: Destroys the target object of *this, if any.

    25        Returns: *this.

        template<class F> move_only_function& operator=(F&& f);

    26        Effects: Equivalent to: move_only_function(std::forward<F>(f)).swap(*this);

    27        Returns: *this.


        ~move_only_function();

    28        Effects: Destroys the target object of *this, if any.

         SECTION.16.3.4  Invocation                                              [func.wrap.mov.inv]

        explicit operator bool() const noexcept;

     1        Returns: true if *this has a target object, otherwise false.

        R operator()(ArgTypes... args) cv ref noexcept(noex);

     2        Preconditions: *this has a target object.

     3        Effects: Equivalent to:
              return INVOKE<R>(static_cast<F inv-quals>(f), std::forward<ArgTypes>(args)...);
              where f is the target object of *this and f is lvalue of type F.

         SECTION.16.3.5  Utility                                                 [func.wrap.mov.util]

        void swap(move_only_function& other) noexcept;

     1        Effects: Exchanges the targets of *this and other.

        friend void swap(move_only_function& f1, move_only_function& f2) noexcept;

     2        Effects: Equivalent to: f1.swap(f2).

        friend bool operator==(const move_only_function& f, nullptr_t) noexcept;

     3        Returns: true if f has no target object.

4. Polls from LEWG San Diego Review (2018)

4.1. Support func(), func() const, func() &&

SF F N A SA
6  6 2 1 0

4.2. Support func() && only

SF F N A SA
2  2 7 1 1

4.3. Remove target/target_type

SF F N A SA
12 5 0 0 0

4.4. Require more stuff (noexcept, const&&, ...)

SF F N A SA
0  1 8 6 0

Note that the final poll (require more stuff) was not due to members being against the design, but because we could easily add those facilities in a later standard without any breakage.

4.5. Name Options

There was one final poll, which brought us to the name any_invocable .

3  unique_function
3  move_function
2  move_only_function
7  movable_function
8  mfunction
10 any_invocable
8  mofun
8  mofunc
0  callback
4  mvfunction
2  func
0  callable
2  any_function

5. Polls from LEWG Kona Review (2019)

5.1. We want to spend time on this now in order to include it in C++20

SF F N A SA
8  8 2 0 0

5.2. Add support for func() const& and func()&

SF F N A SA
0  8 7 0 0

5.3. Add support for func() noexcept (x all of the above)

SF F  N A SA
2  12 2 0 0

5.4. Include the option for CTAD

SF F N A SA
0  1 5 9 0

5.5. Name: callable vs any invocable

SC C N AI SAI
3  2 3 5  6

5.6. any_invocable vs invocable

SAI AI N I SI
3   7  2 5 1

5.7. Header choice

7 <functional>
11 <any_invocable>
11 <invocable>
3 <()>

5.8. Can get std::function from <any_invocable>

SF F N A SA
0  1 4 4 7

5.9. Can get std::function from <invocable>

SF F N A SA
1  3 6 3 2

Decide on <any_invocable>. Unanimous for <functional> to pull it in, even if in its own header.

5.10. Remove the null-check in the call operator and throwing of bad_function_call

SF F N A SA
8  2 1 0 0

5.11. Remove the null-check in constructors that are not nullptr_t

std::any_callable ac = my_ptr_object;
if(ac)  { /* true even if my_ptr is nullptr */ }
SF F N A SA
0  2 2 4 3

5.12. Perfect forwarding for converting constructor instead of by-value

Unanimous

5.13. Forward to LWG for C++20

SF F N A SA
8  5 0 0 0

6. Implementation Experience

There are many implementations of a move-only std::function with a design that is similar to this. What is presented is a conservative subset of those implementations. The changes suggested in LEWG, though minimal, have not been used in a large codebase.

Previous revisions of this paper have included publicly accessible move-only function implementations, notably including implementations in HPX, Folly, and LLVM.

7. Acknowledgments

Thanks to Tomasz Kamiński, Tim Song, and Nevin Liber for suggestions on wording simplifications.

8. References

[1]: David Krauss: N4543 "A polymorphic wrapper for all Callable objects" http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4543.pdf

[2]: Geoffrey Romer: "Bug 34 - Need type-erased wrappers for move-only callable objects" https://issues.isocpp.org/show_bug.cgi?id=34

[3]: Ryan McDougall: P0288R2 "The Need for std::unique_function" https://wg21.link/p0288r2

[4]: Geoffrey Romer: N4348 "Making std::function safe for concurrency" www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4348.html

[5]: Richard Smith: N4820 "Working Draft, Standard for Programming Language C++" http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2019/n4820.pdf